Bu çalışmada, pompa tasarım programları kullanılarak eksenel akışlı bir çocuk kalp destek pompası
tasarlandı. Bu pompanın performansı, hesaplamalı akışkan dinamiği (HAD) yazılımıyla kT-kL-w
türbülans modeli kullanılarak belirlendi. Katı modeli oluşturulan pompanın gövdesi alüminyum
bloktan CNC işleme tezgâhında imal edildi. Bu kalp destek pompasının çarkı, doğrultucusu ve
difüzörünün 3D yazıcıyla imalatı yapıldı. Bu prototip pompanın, HAD simülasyonuyla belirlenen
performans sonuçlarının deneysel doğrulaması, su ile yapıldı. Pompanın 9000-12000 dev/dak dönme
sayısı aralığında, debisi 0.5-5 L/dak ve basınç farkı 35-95 mmHg arasında değişti. Kan benzeri akışkan
için 2 L/dak tasarım debisi ve 80 mm-Hg’lik tasarım basıncı 11750 dev/dak dönme sayısında elde edildi.
Çalışmanın sonunda, tasarım noktasında pompadaki cidar kayma gerilmeleri ve akış çizgileri incelendi.
In this study, an axial flow child heart support pump was designed using pump design
programs. The performance of this pump was determined using the kT-kL-w turbulence model with
computational fluid dynamics (CFD) software. Body of this pump is manufactured from aluminum
block with CNC machining center. The heart assist pump’s impeller, straightener and diffuser were
manufactured with 3D printers. Experimental verification of the performance results of this prototype
pump determined by CFD simulation was made with water. In the range of 9000-12000 rpm of the pump
speed, the flow rate varied between 0.5-5 L/min while the pressure difference varied between 35-95
mmHg. Design pressure of 80 mmHg for design flow rate of 2 L/ min was achieved at 11750 rpm for
blood-like fluid. At the end of the work, the wall shear stresses and flow lines in the pump were
examined at the design point.