Bu çalışmada, PEM yakıt hücresinin anot tarafı elektrospin yöntemi ile
YSZ+SDC+NaCaNiBO ile kaplanmış ve PEM yakıt hücresinin performansı deneysel
olarak incelenmiştir. 0,1 gr YSZ; 0,1 gr SDC; 0,1gr NaCaNiBO; 10 mL methanol ile bir
solüsyon hazırlanmıştır. Bu solüsyondan alınarak, elektrospin metodu ile PEM yakıt
hücresinin hidrojen tarafı kaplanmıştır. Elektrospin yönteminde 15 kV güç
kullanılmıştır. Kaplama sonrası membranın kuruması için 24 saat bekletilmiştir.
Deneylerde, kaplama öncesi ve kaplama sonrası akım yoğunluğu, gerilim yoğunluğu ve
güç yoğunluğu performansları kaydedilmiş ve birbiri ile mukayese edilmiştir. PEM
yakıt hücresi YSZ+SDC+NaCaNiBO ile kaplandığında, çalışma süresinde artış olduğu
tespit edilmiştir.
In this study, performance of PEM fuel cell was experimentally investigated coating on the cathode side of the PEM fuel cell was accomplished with the electro spinning method by using YSZ+SDC+NaCaNiBO. A solution having 0,1 gr YSZ; 0,1 gr SDC ; 0,1gr NaCaNiBO; 10 mL methanol was prepared. This solution was taken out and the hidrogen side of PEM fuel cell was cladded with YSZ+SDC+NaCaNiBO by using electro-spinning method. The electro-spinning power used in this study was 15 kV. After coating, the membrane was left out to dry for 24 hours. In the experimental study, current density, voltage density and power density performances before and after coating have been recorded and then are compared to each other. It was found that runtime of the PEM fuel cell increase of coating with YSZ+SDC+NaCaNiBO.