2008, Cilt 7, Sayı 2
http://hdl.handle.net/123456789/10775
2024-03-29T07:04:28ZBetonarme çerçevelerde kısmi kuşaklamanın etkinliği üzerine deneysel bir çalışma
http://hdl.handle.net/123456789/10784
Betonarme çerçevelerde kısmi kuşaklamanın etkinliği üzerine deneysel bir çalışma
Akın, S. Kamil; Kara, Nail; Kaltakcı, M. Yaşar
Deprem etkisi altındaki ülkelerde oluşturulan modern deprem yönetmeliklerinden önce yapılmış yapıların deprem güvenliğinin artırılması gerekmektedir. Bu konudaki çalışmalar tüm dünyada araştırmacıların başlıca çalışma konularındandır. Yapılan güçlendirme çalışmalarının yapı davranışı üzerine etkilerinin irdelenmesi amacıyla yapılan deneyler ışığında en etkin, en ekonomik, en hızlı güçlendirme metodolojisi oluşturulmaya çalışılmaktadır. Etkin güçlendirme metotlarından birisi de çelik kuşaklama ile yatay yüklere karşı güçlendirmedir. Bu güçlendirme metodunda kullanılan çelik kuşaklamaların kesitinin seçiminde yatay yük altında kuşaklamalarda oluşan basınç kuvvetinin sonucu olarak ortaya çıkan burkulma etkisi baskın rol oynamaktadır. Bu çalışmada, kuşaklamalar yalnızca çekme kuvveti alan çubuklar şeklinde oluşturulmuş ve kuşaklamanın etkinliği 1/5 modellenmiş 3 katlı, 3 açıklıklı 4adet deney numunesinde tersinir-tekrarlanır yatay yükler altında test edilmiştir.; The structures which were designed according to the old earthquake codes sometimes need strengthening for lateral earthquake forces. Most economic, most effective and rapid strengthening methods are investigated by the results of different strengthening techniques on the structural behavior. Bracing is one of the effective strengthening techniques. On the other hand, sections of bracing members are not economical because of buckling under compression. This study represents use of buckling free, tension only bracing members on the poorly reinforced RC frames. 1/5 modeled 4 RC frame specimen are tested under cyclic loading representing earthquake forces.
URL: http://sutod.selcuk.edu.tr/sutod/article/view/62
2008-01-01T00:00:00ZThe effect of stirrups and hooked steel fibers instead on moment-rotation capacity of beam-column connections
http://hdl.handle.net/123456789/10783
The effect of stirrups and hooked steel fibers instead on moment-rotation capacity of beam-column connections
Akın, S. Kamil; Kara, Nail
In earthquakes the energy should be dissipated by structural elements. The energy concentrated in beam-column connections and the earthquake loads forces the connections to rotate. As a result of this, the connections should have the ability of rotation without reduction in axial load capacity of columns. The concrete in the connection zone should not break, collapse and should stay stiff for no reduction in the load bearing capacity of connection. Because of this all codes forces design engineer and constructor to continue stirrups in beam or column without break in the connection. While application of reinforcement according to the design in construction stage , to put stirrups in connection is very hard and takes a lot of time also it is very hard to concrete this region also. This study concerns with the use of hooked steel fibers instead of stirrups in beam column connections. Recent studies made clear that , use of steel fibers increase ductility, stiffness and toughness in concrete[1] [2] [3] [4]. In this study 5 beam-column connections are tested under cyclic loading. First specimen has stirrups in connection zone according to code, the rest have no stirrups but have hooked steel fibers instead in connection zone with varying volumetric ratio 0,000%, 0,250%, 0,375%, 0,500%.
The specimens are tested in Selcuk University Civil Engineering Department Structural Laboratory. Earthquake loads are simulated on the 1/1-scaled specimens and all vertical and horizontal displacements are taken by a dozen of LVDT and this data is sent and saved by the help of an electronic device and computer program. The experimental moment and rotation capacities are found and compared.
URL: http://sutod.selcuk.edu.tr/sutod/article/view/61
2008-01-01T00:00:00ZSKK yöntemiyle birleştirilen alüminyum alaşımlarında işlem parametrelerinin mikroyapı ve mekanik özellikler üzerindeki etkisi
http://hdl.handle.net/123456789/10782
SKK yöntemiyle birleştirilen alüminyum alaşımlarında işlem parametrelerinin mikroyapı ve mekanik özellikler üzerindeki etkisi
Sarsılmaz, Furkan; Özdemir, Niyazi
Bu çalışmada iki farklı (AA1050 ve AA5083) alüminyum alaşım plakaları, alın pozisyonunda sürtünme karıştırma kaynak (SKK) yöntemiyle birleştirilmiştir. Kaynak işlemi, 1400 dev/dak dönme hızı ve beş farklı ilerleme hızları (200, 250, 300, 350, 400 mm/dak) altında tek tip uç geometrisi (konik vida) kullanılarak gerçekleştirilmiştir. Kaynaklı bağlantıların ara yüzeyleri optik mikroskop yardımı ile incelenmiştir. İncelemelerde kaynak ara bölgesinde birbirinden farklı dört bölge oluşmuştur. Ayrıca mekanik özelliklerin belirlenmesi amacıyla numunelere çekme deneyi uygulanmıştır. Çekme deneyleri sonunda, 350 mm/dak ilerleme hızı ile birleştirilen numunede en iyi mukavemet değerleri elde edilmiştir.; In this study, dissimilar AA1050 and AA5083 aluminum couples having two different properties were welded by using friction stir welding (FSW) process. In this process, five different traverse speed were used such as 200, 250, 300, 350, 400 mm/min with the same (screw) profile and under constant rotational speed (1400 rpm). The interface appearance of the welded samples was examined by optical microscopy. The examination shows that there are four different regions in interface of the all samples. In order to determine mechanical properties of samples, the tensile tests were conducted. The end of these tests, the best result was obtained from FSWed by 350 mm/min traverse speed in sample N4.
URL: http://sutod.selcuk.edu.tr/sutod/article/view/60
2008-01-01T00:00:00ZKalın cidarlı üniform akışlı bir boruda, ısıl giriş bölgesi geçici rejim birleşik ısı transferi
http://hdl.handle.net/123456789/10781
Kalın cidarlı üniform akışlı bir boruda, ısıl giriş bölgesi geçici rejim birleşik ısı transferi
Darıcı, Selçuk; Ateş, Ali; Bilir, Şefik
Üniform akışlı bir boruda, ısıl giriş bölgesi, geçici rejim birleşik ısı transferi, iki boyutlu cidar ve eksenel akışkan iletimi dikkate alınarak incelenmiştir. Problem, başlangıçta eşit sıcaklıktaki yarı sonsuz bir boruda, çevre akışkanı sıcaklığındaki ani değişme şartı ile ele alınmış ve sonlu farklar yöntemi ile sayısal olarak çözülmüştür. Sonuçlar boyutsuz yerel arayüzey ısı akısı, dış yüzey ve arayüzey sıcaklıkları, yığık sıcaklık, radyal yönde sıcaklık değişimi ve Nusselt sayısı cinsinden verilmiştir.; Transient conjugated heat transfer in a pipe with slug flow is analysed involving two-dimensional wall and fluid axial conduction. The problem is solved numerically by a finite difference method for a semi-infinite pipe which is initially isothermal and with a sudden change in the ambient temperature. The results are given by nondimensional interfacial heat flux values, the outer and inner wall temperatures, bulk temperatures, radial temperature distributions and Nusselt numbers.
URL: http://sutod.selcuk.edu.tr/sutod/article/view/59
2008-01-01T00:00:00Z